The automatic transmission is the most complex component in an automobile and it is also one of the most expensive. Discover why the right transmission fluid is critical to the proper functioning and long-life of a step-type automatic transmission.
There are three types of automatic transmissions: a DCT (Dual-Clutch Transmission), CVT (Continuously-variable transmission) and step-type transmission (AT).
Main components of a step-type automatic transmission
To understand the basic operations of a step-type transmission you must know its main components:
- Fluid pump: supplies pressured transmission fluid for many uses throughout the transmission.
- Planetary gear sets: provide the chosen gear ratio for the vehicle.
- Clutches or clutch packs: engage and disengage the gear sets.
- Torque converter: connects the transmission to the engine and multiplies the torque during initial acceleration. It uses two turbines which spin independently but which are fluid-coupled, allowing the engine to idle while the vehicle is stopped and produces smoother acceleration as it shifts through the gears.
- Mechatronics: the brain of the transmission. It is a complex system of ports, valves and electronics that control all transmission functions.
How does a step-type automatic transmission work?
At idle in park, the pump components spin, providing the pressured fluid needed to operate the transmission. When the vehicle is placed in drive, clutches connect the gear set for first gear to the wheels. When you release the brakes, the car begins to move. As the vehicle accelerates, second gear clutches and planetary gears are engaged. After more acceleration, second gear disengages and the clutches and gears for third gear are deployed. All the gear combinations work the same way.
The mechatronic brain calculates the vehicle speed, the engine load and the position to the throttle and break, among other factors. It then sends high-pressure transmission fluid to engage the proper clutch packs and shift the gears.
The different functions of an automatic transmission fluid
The automatic transmission fluid (ATF) is critical to the good functioning of an automatic transmission.
The automatic transmission fluid has to do a lot of different jobs:
- It acts as a hydraulic fluid to engage clutch packs and shift the gears.
- It acts as a corrosion inhibitor and wear protection for the planetary gear sets.
- It controls friction in the clutch packs and maintains it throughout the drain interval.
- It provides lubrication to the hundreds of moving parts, even under high temperatures and extreme pressures.
To flawlessly perform these different jobs, an automatic transmission has to:
- flow easily from -40°C to over 200°C even in fine valve assemblies;
- have low conductivity and be compatible with all electronic components.
The importance of selecting the right automatic transmission fluid
Modern ATF’s include friction modifiers, special agents for anti-wear and anti-corrosion agents and chemicals to enhance high-heat performance and maintain a specific viscosity.
Using the right automatic transmission fluid is critical to the performance and long-life of your transmission. Using the wrong fluid may cause excessive wear in pumps, gears and bearings leading to permanent damage and the need to replace your transmission.
A single mechanical failure could disable the vehicle entirely.
Q8Oils ATF portfolio
The automatic transmission is one of the most complex components in your car and it is also one of the most expensive. That is why selecting the right transmission fluid is very important.
At Q8Oils we have a broad portfolio of high-performance automatic transmission fluids for all car brands:
- Q8 Auto D VI: synthetic automatic transmission fluid for General Motors transmissions and other vehicles that require low viscosity ATF oil.
- Q8 Auto JK: synthetic automatic transmission fluid for Aisin Warner transmissions. This product offers excellent thermal stability and improves overall transmission durability and cleanliness.
- Q8 Auto MV: synthetic automatic transmission fluid that is compatible with vehicles that require low viscosity oil. This product is suitable for a wide range of European, Japanese and Korean passenger cars.
- Q8 Auto CVT EVO: multi-vehicle Continuous Variable Transmission fluid for modern transmissions. This product is shear stable, offers extended drain intervals, excellent performance reserve and prevents slipping belts/clutches and breakdowns.
- Q8 Auto DCT EVO: Dual Clutch Transmission fluid for modern transmissions. This product offers class-leading dual clutch and synchro friction control as well as superb protection of gears and bearings.
We recommend to follow the manufacturers suggested service intervals and use only OEM recommended automatic transmission fluids to help maintain the good functioning of your transmission.
Q8 Auto DCT EVO
Synthetic DCT transmission fluid
Automatic transmission fluid
Q8 Auto CVT EVO
Synthetic CVT transmission fluid
Automatic transmission fluid
Q8 Auto MV
Synthetic automatic transmission fluid
Automatic transmission fluid
Q8 Auto D VI
Synthetic automatic transmission fluid for GM Dexron VI
Automatic transmission fluid
Q8 Auto JK
Synthetic automatic transmission fluid designed for Aisin Warner
Automatic transmission fluid
We recommend that you follow the manufacturer’s recommended service intervals and use only the automatic transmission fluids recommended by the OEM to keep your transmission running smoothly.
