The evolution of EURO emissions legislation has been key to reduce emission levels of passenger cars (PCMO) and heavy-duty vehicles (HDDO) in Europe.
Emissions evolution PCMO & HDDO
Q8 Mahler Clean Technology and Gas Engine efficiency
For more than 30 years Q8Oils has been performing research to answer the typical challenges of gas engine oils. The result is a range of products that prolong the drain interval and engine cleanliness and to increase the life span of cylinder heads, specifically the valves and the vale seats.
Why does leaching cobalt matter?
The cobalt that is released into metalworking fluid (MWF) as a result of the shaping and sharpening processes may dissolve and circulate in the fluid or become sediment at the bottom of the filter into which it was released.
Breaking: Mahler GR8 receives new Jenbacher J920 approval
INNIO Jenbacher approved Q8 Mahler GR8 as the first high performance 0.8% S-Ash gas engine oil for the use in INNIO Jenbacher 9-series gas engines. The approval is the result of a series of field trials and in-house tests.
Are you working safely with Metalworking Fluids?
Exposure to mists from metalworking fluids forms a potential risk to machine operators. The best way to avoid health problems is installing a risk and fluid management program and selecting safe and healthy products.
Inhalation of the mist generated by neat & soluble metalworking fluids can lead to respiratory diseases such as COPD (chronic obstructive pulmonary disease) and EAA (extrinsic allergic alveolitis), also known as hypersensitivity pneumonitis.
Employers must ensure that adequate measures are taken to reduce the level of operator exposure to mist.
Oxidation rating of used gas engine oils samples
Oxidation rating is one of the elements that influence oil drain interval. In this article we describe the different methods to test the oxidation rating of used gas engine oil samples.
World Class Drawing & Rolling Solutions
European technology and expertise tailored for the Worldwide Industry. Technical support to improve the productivity of the lubricant in your applicationWorldwide supply and support, exports to customers in over 85 countries. Seeking distributors and agents with technical expertise.
Thermal and physical properties of lubricants
Knowledge about thermal and physical properties of lubricants enables OEM’s to improve their equipment designs. Q8Oils has tested and measured the most important properties of some of its products. To support our partners we give them insight into this valuable information.
New Q8 Formula Truck products support the 3 market drivers for the HDD-Market
Three main market drivers continue to force a rapid change in the European heavy duty diesel (HDD) market. The continuous focus on efficiency, durability and emissions impacts future engine design. Engine oil technology as part of the engine design, is a key ingredient on the fuel saving menu.
How sealants and anti-rust fluids affect lubricant anti-wear properties
The main circulation lubricant in industrial applications comes into contact with anti-rust fluids and sealants used to prevent leakages. Q8Oils has tested and analysed how these products affect lubricant anti-wear properties.
In order to understand what could happen if the system is not properly flushed before start-up and if excessive amounts of sealant are used, Q8Research has investigated this issue.
